27
Step 3
Install the propeller and spinner following the
instructions provided with the engine. Never use
an adjustable wrench to install the propeller nut
as it will eventually round the corners of the nut,
making it difficult to tighten or loosen in the
future.
Step 4
Slide the long and short aluminum tubes into the
stopper. The holes for these tubes are pre-made
in the stopper. Slide the metal disk (small) on the
back of the stopper, while the metal disk (large)
goes on the front of the stopper.
Step 5
Use a #1 Phillips screwdriver to start the 3mm
x 20mm machine screw. The screw only needs
to be flush with the metal disk (small) at this
time. Carefully bend the longer aluminum tube
up at a 45-degree angle, being careful not to
place a kink in the tube.
Summary of Contents for Easy Stick-40 Kit
Page 5: ...5 Parts of the Airplane...
