Version 2018.1
www.valoya.com
+358 10 2350 300
Installation Instructions
9
1) Connect the supplied mains (Wieland RST) connector to a suitably rated mains cable (not supplied) - See
“Wieland mains connector connection” instructions (next page).
2) Connect the connector to the lamp.
3) If dimming is to be used, connect a suitably rated 2-core cable (not supplied) to the pre-installed in-line
(Phoenix) connector - See “Phoenix in-line connector connection”.
4) If dimming is to be used, connect to the “+” and “-” of a compatible current sink dimmer/controller.
5) Connect the mains cable to the mains supply.
Current sink
controller
(Check compatibility)
3
2
1
4
5
LUMINAIRE CONNECTION
Mains (AC) connectors
Dimming (DC) connectors
Connect:
•
Pin 1 (d)
•
Pin 2 (dimming -)
