4000803-07
This appliance is certifi ed for use from 0-4500ft. For
altitudes above 4500ft see local codes.
Kit Contents
• 1 Pilot injector, see chart for identifi cation
• 1 Main burner injector, see chart for identifi cation
• 1 Minimum rate by-pass screw
• 1 Special bit for control cover screw (for RFBV/XB only)
• 1 Set of conversion labels
Tools Required
• Wrenches, to disconnect gas line
• Phillips (+) screwdriver, to remove burner module
• Small jewelers size fl at blade screwdriver, to set pressure
• Small
fl at blade screwdriver, to release pressure tap on
valve
• Needle Nose Pliers, to remove by-pass screw
• Hex Allen wrench, 4 mm or 5/32”, to remove pilot injector
• Special 2-pin screwdriver tip, supplied with kit, to
remove valve cover
• Manometer, to set pressure
Fireplace Models
RF24DVN
RF24IDN
RF24DVP
RF24IDP
RF24BN
RF24XBN
RF24BP
RF24XBP
Gas
Natural
Propane
Natural
Propane
Altitude (Ft)
0–4,500 Feet
Input Max. (Btu/h)
24,000
24,000
20,500
19,000
Input Min. (Btu/h)
10,500
10,500
12,500
12,500
Manifold pressure (in w.c.)
3.95
9.5
3.7
10.5
Min. Supply pressure (in w.c.)
5.0
11.0
5.0
11.0
Max. Supply pressure (in w.c.)
10.5
14.0
10.5
14.0
Main Burner Injector
82-580
92-260
82-580
92-200
Pilot Injector
62
30
62
30
By-Pass Screw
160
105
185
125
Specifi cations
© 2011 Miles Industries Ltd. All rights reserved.
WARNING
This conversion kit shall be installed by a
qualifi ed service agency in accordance with
the manufacturer’s instructions and all appli-
cable codes and requirements of the authority
having jurisdiction. If the information in these
instructions is not followed exactly, a fi re, ex-
plosion or production of carbon monoxide may
result causing property damage, personal in-
jury or loss of life. The qualifi ed service agency
is responsible for the proper installation of this
kit. The installation is not proper and complete
until the operation of the converted appliance
is checked as specifi ed in the manufacturer’s
instructions supplied with the kit.
Use this manual in conjunction with the instal-
lation manual supplied with the appliance.
Gas Conversion Kits
RA24NK (DV), RA24PK (DV) RA24BN (BV), RA24BP (BV)
Installation Instructions
Use with
Valor Retrofi re Heater Models RF24D, RF24B, RF24ID or RF24XB ONLY
