Valor RetroFire RF24DJN, Homeowner'S Manual

Page: 23 / 26

23
Appendix A-Remote Control Operation
Setting ºC/24-hr or ºF/12-hr clock
In MAN mode, press and hold +
buttons until temperature / clock display
changes from
°F / 12-hour °C / 24-hour
Setting Time
The time display will ȵ ash after either:
- installing the battery, or
- pressing +
To set the time, press buttons:
= hour
= minutes
Press or wait to go back to MAN.
Modes of Operation
Brie ȵ y pressing SET cycles through
modes of operation.
MAN
>
TEMP
>
TEMP
>
TIMER
>
MAN
NOTE: Press or to reach
MAN
mode.
MAN
Manual Mode
Manual ȵ ame height adjustment.
TEMP
Daytime Temperature Mode
When pilot is lit, room temperature
is measured and compared to set
temperature. Flame height automatically
adjusts to reach Daytime Set
Temperature.
TEMP
Night time Setback
Temperature Mode
When pilot is lit, room temperature
is measured and compared to set
temperature. Flame height automatically
adjusts to reach Night Time Setback
Temperature.
TIMER
Timer Mode
When pilot is lit, two periods of time
(P1 and P2) can be programmed to use
Daytime and Night time temperatures
at speci ȴ c times.
Note: Display shows set temperature
every 30 seconds.
Set the di
΍
erent parameters when
they are ȵ ashing.