background image

 Valor

®

 Outdoor Installation Warranty

If you have a problem with this unit, please contact your dealer or supplier immediately. Under no circumstances 

should you attempt to service the unit in any way by yourself. The warranties in paragraphs 1 are provided 

only to the initial owner of this unit, are not transferable and are subject to the conditions and limitations in 

paragraphs 2 and 3. Please review the conditions and limitations carefully and strictly follow their requirements.

1. Two-Year Parts Warranty

Two (2) years from the date of purchase, the 

Company, at its option, will repair or exchange 

all parts and components that are found to have 

a bona 

ȴ

 de defect in material or workmanship 

under normal conditions of use.

2. Conditions and Limitations

a)  The warranty registration card must be 

completed by the initial owner and returned 

to the company within 90 days. Alternatively, 

the warranty registration form may be 

ȴ

 lled out online at 

valor

ȴ

 replaces.com

b)  Installation and maintenance must be performed 

by an authorized and trained dealer in accordance 

with the Company’s installation instructions.

c)  This warranty is void where installation of the 

unit does not conform to all applicable codes, 

including national and local gas appliance 

installation codes and building and 

ȴ

 re codes.

d)  The owner must comply with all 

operating instructions.

e)  The Company is not responsible for the 

labor costs to remove defective parts or re-

install repaired or replacement parts.

f)  The initial owner of the unit will be responsible 

for any shipping charges for replacement 

parts as well as travel time incurred by the 

dealer to perform the warranty work.

g)  This warranty applies to non-commercial use and 

service and is void if it is apparent that there is 

abuse, misuse, alteration, improper installation, 

accident or lack of maintenance to the unit.

h)  This warranty does not cover 

damage to the unit due to:
i)  

Improper installation, operational 

or environmental conditions.

ii)  Inadequate ventilation in the area 

or competition for air from other 

household equipment or appliances.

iii)  Damage due to chemicals, dampness, 

condensation, or sulphur in the fuel supply 

lines which exceeds industry standards.

i)  This warranty does not cover glass, log breakage 

or damage to the unit while in transit.

j)  The Company does not allow anyone to extend, 

alter or modify this warranty and assumes no 

responsibility for direct, indirect or consequential 

damages caused by the unit. State or provincial 

laws where the initial owner or user resides may 

provide speci

ȴ

 c rights extending this warranty 

and, if so, the Company’s sole obligation 

under this warranty is to provide labor and/

or materials in accordance with those laws.

3. No Other Warranty

All obligations to repair this unit are de

ȴ

 ned in 

this warranty. Some states or provinces may 

speci

ȴ

 cally mandate additional obligations on 

the part of manufacturers, but in the absence 

of such speci

ȴ

 c legislation, there is no other 

warranty or obligation expressed or implied.

190

ɋ

ɋ

2255 Dollarton Highway, 

North Vancouver, BC

Ʉ

Canada

Ʉ

V7H 3B1

warranty work.

21

Summary of Contents for RetroFire RF24DJN



























Reviews: