42
Installation
Refi t and Check Window
1. Place the window centrally
against the engine unit and
resting on the support at bottom
front of the engine.
2. Pull the clamping bars forward
and rotate inwards to secure
the top of the window.
3. Fit the two spring loaded bolts
through the bottom of the
window and tighten to secure
the bottom of the window.
4. Pull the top and bottom of the
window forward and release
to ensure the springs return in
position.
5. Apply fi rm hand pressure around the window frame
to ensure the window is sealed tight against the
fi rebox.
6.
If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
Safety warning plate
WARNING
Failure to install the window correctly can
leak carbon monoxide, aff ect the performance
of the fi replace, damage components, cause
overheating resulting in dangerous conditions.
Damage caused by incorrect window installa-
tion is not covered by the Valor warranty.
!
DANGER
The window unit must be correctly installed,
fastened and sealed after servicing or serious
bodily injury and/or damage to the appliance
may result.
To ensure a safe operation:
•
Double-check that the window frame is
correctly installed;
•
Verify that the levers are hooked properly to
the window tabs then;
•
Pull out the top of the window and release it
to insure the springs return it;
•
Ensure the window is sealed before operation.
!
QUALIFIED
INSTALLER
