35
Installation
Install Ceramic Liners (Logs or Coals only)
The 530LSK and CSK fuel beds include a set of
reversible liners. One side shows the brick pattern and
the reverse side shows a black vertical fl uted pattern.
Follow the instructions below to install the liner set on
the chosen side.
• 530RSK Rock Set liners.
For ceramic liners
installation with the 530RSK, see
Install the
530RSK—Rock Set and Liners
section in this
manual.
• 530DWK Driftwood Kit liners.
For ceramic liners
installation with the 530DWK, see
Install the
530DWK—Driftwood Kit and Liners
section in this
manual.
• 580RGL Refl ective Glass Liner Set.
To install the
580RGL, see the installation instructions provided
with the kit.
• 567FGP Top Grille.
At this point, you can install the
567FGP, if used (logs, rocks or driftwood versions
only). The 567FGP Top Grille is sold separately
except when included with front trim—see front trim
installation manual.
1. Locate the ceramic rear wall in the channel at back
of the fi rebox and fl at against the back of the fi rebox.
2. Locate the sidewalls in the channels at the sides of
the fi rebox.
3. Remove two screws from under the top front of the
fi rebox. Using these screws fi t the port cover.
1
3
2
QUALIFIED
INSTALLER
