29
29
Valve
Switch
ON
OFF
—
O
Manual On/Off Switch
In cases where you want to turn off your fireplace and cannot do it
with the remote control handset (misplaced, lost, dead batteries, etc.)
or if you need to replace the receiver’s batteries, you can turn off the
appliance with the manual switch located on the right hand side of the
valve.
If you are planning not to use your fireplace for a prolonged period of
time, remove the battery from the remote handset and turn off the gas
valve using the manual ON/OFF switch.
Low Battery Indication
Remote handset:
BATT
will appear on the display when the battery needs to be replaced.
Replace with one 9 V battery (alkaline recommended).
Receiver:
Three short ‘beeps’ will sound when the motor turns when the batteries need to be replaced. Replace with four
1.5 V batteries (alkaline recommended).
NOTE:
With very low battery, the valve shuts off the fire completely. This does not happen when the power supply is
interrupted.
Automatic Standby Mode
If there is no transmission from the handset to the receiver within a 6-hour period, the appliance will go to
STANDBY
(pilot) mode.
Handset / Receiver Match
The remote control handset and receiver are programmed to function together. In case of a replacement of the handset or
the receiver, you will need to reset them to allow them to function together as indicated on page 24. Contact your dealer
for details
Owner’s Information
