26
Fuel Beds
Installation
3. Install the center cross log placing its larger end in
the notch of the center log and the notch of the base
log.
4. Place the left-hand cross log inserting its pin in the
hole in the platform and resting its other end in the
notch of the base log.
5. Place the right-hand cross log resting its wider end
on the edge of the platform and its narrower end in
the notch on the base log. Ensure the bottom of the
log does not exceed the edge of the platform.
6. Add some embers, by hand, on the platform around
the logs. Use the embers to hide the internal edge of
the platform.
DO NOT put any embers into the pilot area!
