Valor LEGEND G4 780IN (NG), Installation & Operating Instructions Manual, Page: 29 / 42

Operation Modes
STANDBY MODE—Ignited pilot only.
man
MAN MODE —Manual Mode. You can use this mode to adjust the flame height up or down.
☼
temp
TEMP MODE —Daytime Temperature Mode (appliance must be in Standby mode; pilot ignited): The room
temperature is measured and compared to the set temperature. The flame height is then automatically adjusted to
achieve the Daytime set temperature.
☽
temp
TEMP MODE—Nighttime Setback Temperature Mode (appliance must be in Standby mode, pilot ignited): The room
temperature is measured and compared to the Nighttime Setback temperature. The flame height is then automatically
adjusted to achieve the Nighttime Setback temperature.
timer
TIMER MODE—(appliance must be in Standby mode, pilot ignited): The Timer setting allows you to set two burner
ON times and two burner OFF times for every 24-hour period.
Scrolling through modes and functions
Briefly pressing the SET button changes the operation sequences in the following order:
man
→
☼
temp
→ → →
☽
temp
→
timer
→
and back to
man
.
NOTE: MAN mode can also be reached by pressing either the or buttons.
NOTE: The icon represents ambient lighting which is not available on this fireplace. The
represents the optional 795CFK Circulating Fan Kit which functions automatically with the burner
when installed on the fireplace
Mode Sun
☼
Moon
☽
TEMP Daytime temperature setting Nighttime temperature setting
TIMER Start time setting Stop time setting
Remote Control Operation
Flame Height
The flame height can be adjusted in the following manners. In MANUAL mode,
1. Press the (large flame) button to turn on the main burner.
2. Press the (large flame) button to increase the flame height.
3. Press the (small flame) button to decrease the flame height or to go to pilot Standby
position.
For fine adjustments, tap the and buttons.
NOTE: While pressing either button, a symbol indicating transmission appears on the upper right
hand corner of the display. The receiver confirms transmission with an acoustic signal.
29