16
Checking pilot and burner flames
Note
The height and color of your flames can vary
depending on fuel type, fuel quality and
mixture, altitude, and aeration adjustment at or
after installation.
The photos of typical flame appearance are for
illustrative purposes only. Your fireplace may be
operating normally but appear different than
the photos.
Venting configuration, elevation, burner
aeration setting and local fuel heating value can
all affect flame appearance.
739DWK Driftwood Logs
739TLK Traditional Logs
739RSK Rock Set
Typical
fl
ame appearance
The pilot light and burner
fl
ames should be checked
periodically. Check after the
fi
re has been on for at
least 30 minutes. The pilot
fl
ame must cover the tip
of the thermocouple probe. The main burner
fl
ame
pattern will vary depending on the type of installation
and climatic conditions.
Performance of propane gas
fi
replaces may be
a
ff
ected by the quality of commercial gas supplied
in your area.
The
fi
replace area must always be kept clear and
free from combustible materials, gasoline and other
fl
ammable vapors and liquids.
Inspect the vent terminal outdoors regularly to
ensure that it is not obstructed by snow, trees,
bushes, leaves, or other objects.
Inspect the vent system regularly. We recommend at
least an annual inspection.
Thermocouple
probe must be
LQȵDPH
Pilot lIght
Pilot lIght
Pilot lIght
739LSK Traditional Logs
Pilot light