Valor Legend G3.5 700IN, Owner'S Manual

Page: 9 / 46

Manual ON/OFF Switch
Wall Switch
(optional)
Remote control
handset
OFF
ON
How to Turn Your Fireplace OFF
(including pilot)
Familiarize yourself with each of these methods before
operating your
fi replace.
Handset and Wall Switch: Press and hold the OFF
button for a second.
If the
fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
Manual ON/OFF Switch: Press the O button.
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your
fi replace will not turn on when you
don’t want it on.
First, ensure your fi replace is turned off—including
the pilot—and cold BEFORE going ahead.
• You can prevent your fi replace from lighting by
pressing the O button on the manual ON/OFF
switch on the gas valve—see image above.
• Alternately, you can remove all batteries from the
battery box as well as the battery from the handset.
Automatic Shut-Off (in certain conditions)
Your fi replace’s remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See page 14 in the
Remote Control
Operation
section for a description of this feature.
Locating Lighting, Operation and Rating
Information Plate
The Lighting, Operation and Rating information plate is
located at the right of the
fi rebox. To access the plate,
remove the right hand side door, grab the plate and
take it out to read it. There is important information on
both sides of the plate.
Servicing Your Fireplace
If any attention is required for your appliance, contact
your supplier quoting the model number. It will be helpful
if the appliance’s serial number can also be quoted. This
number is on the rating plate, which is located at the
right of the
fi rebox. The replacement parts are shown
at the end of this manual. Please always quote the part
number and description when requesting spare parts.
Operating Your Fireplace
There are three ways to control your fi replace.
1. Thermostatic Remote Control;
2. Wall Switch (optional);
3. Manual On/Off Switch.
The manual On/Off switch must be ON for the fi replace
to function. It can be used to shut off the fi replace in
case of emergency—see next sub-section.
The Thermostatic Remote Control can be programmed
to function automatically—see pages 10–15.
The Wall Switch (optional) can be used to turn on, off
and to increase or decrease the
fl ame height—see
1265WSK—Wall Switch Kit.
NOTE: The remote control in the AUTO mode will
override the wall switch.
WARNING
DO NOT ATTEMPT TO TOUCH THE DATA PLATE
WHILE THE FIREPLACE IS STILL HOT!
Let the
fi replace cool fi rst before touching it.
Wall Switch
(optional)
Manual On/
Off Switch
Thermostatic Remote
Control
Owner’s Information
!
9
OWNER’S
INFORMATION