Rocks
Correct Flame Picture
Pilot Flame can be
seen between twig
and rocks
Checking Pilot and Burner Flames
A periodic check of the pilot and burner
fl
ames should
be made. Check after the
fi
re has been on for at least
30 minutes. The pilot
fl
ame must cover the tip of the
thermocouple probe. The main burner
fl
ame pattern will
vary from appliance to appliance depending on the type
of installation and climatic conditions.
Pilot
Flame
Thermocouple
Probe must be
in Flame
Correct Flame Picture
Logs
Pilot Flame can be
seen between logs
Owner’s Information
2. Place the window in its bottom railing and push its
top against the
fi
rebox.
3. While you hold it, unhook the side levers from the trim
supports and hook them into the window tabs.
4. Pull out the top of the window and release it to
ensure the springs return it.
5. Apply light hand pressure against the window frame
sides to bed-in the window seal.
6.
If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
7. Reinstall the access side doors to the
fi
replace.
8. Rehook the front trim
fi
tted
with the barrier screen
.
IMPORTANT:
To ensure a safe operation, ensure that
the levers are hooked properly to the window tabs.
Safety warning plate
WARNING
FOR SAFETY PURPOSE, ensure the barrier
screen is re-installed on the
fi
replace front after
maintenance.
!
7
OWNER’S
INFORMATION
Summary of Contents for Legend G3.5 700IN
Page 44: ...44...
