Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Switch Plate
Alternative 1
Alternative 2
Alternative 3
Install Handset Wall Holder
The remote control kit for this
fi
replace
comes complete with a wall-mounted holder.
This holder is not required in all installations
but is provided as an optional feature for
those customers who wish to mount the
remote handset to the wall.
To install the holder to the wall,
fi
nd a
convenient location and use the hardware
provided with the kit. See the diagram below
for required hardware and con
fi
gurations.
Note that the holder can be installed at the
base of a light switch plate.
IMPORTANT
. The location of the remote
control handset is important to assure proper
temperature regulation. To obtain a constant temperature, we recommend that the handset should be between 3
and 15 feet away from the appliance
but not directly above it
. We also advise that the handset should be located
away from any other heat source and not in direct sunlight as this may affect the temperature sensor located in the
remote handset.
Installation
QUALIFIED
INSTALLER
32
