5.10 Installation options.
In the United Kingdom, as supplied, the appliance can be installed in the following
situations:
Note: “D” dimension critical for clearance of the trim depth
5.10.1
Conventional fireplace and hearth.
-
To a fireplace opening and hearth complying with BS1251 after removal of the
fireback and sufficient material behind the fireback for a debris catchment space.
5.10.2.
‘Hole-in-the-wall’ Installations
-
It is recommended that a hearth should be installed as in section 5.8.
-
If a hearth is not fitted, the fire must be installed so that the distance from the base
of the fireplace opening in the wall to the finished floor level is at least 110mm. Where
there is no floor covering or carpet and the floor is of a type that is likely to be
covered in such a way in the future then the distance from the base of the fireplace
opening in the wall to the floor level should be increased to at least 180mm.
©
GDC Group Ltd. NOV 2017
Page 16
INSTALLER GUIDE
A
B
D
50
C
E
Hearth & Fireplace opening dims
Dimension
600FS / 600RC
800FS / 800RC
1000FS / 1000RC
A
460 mm Max / 450 mm Min 460 mm Max / 450 mm Min
460 mm Max / 450 mm Min
B
635 mm Max / 600 mm Min 835 mm Max / 800 mm Min
957 mm Max / 922 mm Min
C
340 mm Min
340 mm Min
340 mm Min
D (Edge Trim)
5 mm Min
5 mm Min
5 mm Min
D (Grande Trim)
28 mm Min
28 mm Min
28 mm Min
E
300 mm Min
300 mm min
300 mm min
