Burner.
To gain access to the burner the window assembly and ceramic components must be
removed as in the previous sections. Be careful not to damage the front coal as this
will be in situ.
Remove any deposits of soot or other foreign matter from the surface of the burner
with a dry soft brush. Be careful not to brush any particles into the open slots.
Remove any particles from the slots with a vacuum cleaner fitted with a soft brush
attachment.
Do not poke wire, etc. into the slots in the burner.
CERAMIC FUEL EFFECT FITTING
The installer and owner guide for the ceramic fuel effect is separate from this guide.
The installer may have attached it to this guide or placed it inside. It is important that
the installer and owner guide for the ceramic fuel effect is followed correctly. If
replacing the ceramic fuel effect, where a new guide is supplied, follow the installer
and owner guide supplied with the replacement fuel effect.
Keep the replacement installer and owner guide with this owner guide for future
reference.
If you wish to replace any of the ceramic fuel effect pieces, spare parts are available
nationwide via the ‘
interpart
stockist network’. For your local stockist consult Yellow
pages under Central Heating.
© GDC Group Ltd. 2012
Page 58
OWNER GUIDE
