12
We recommend having your
fi
replace serviced every year. Contact your dealer quoting the model number. It will
be helpful if the
fi
replace’s serial number can also be quoted. These numbers are on the information card (see
page 7).
A list of replacement parts is included in your
fi
replace Installation Manual. Please always quote the part number
and description when requesting spare parts.
Annual Inspection
Maintain the safe operation of your
fi
replace. Contact your dealer to have a quali
fi
ed technician go over the list
below and make the necessary veri
fi
cations at least once every year.
Safe Operation List:
to be performed by a quali
fi
ed technician only.
Inspect and operate the pressure relief mecha-
nism to verify relief mechanisms are free from
obstruction to operate. See
Cleaning Your Fire-
place
section of this manual.
Clean glass window with a suitable
fi
replace
glass cleaner. Abrasive cleaners must not be
used. Be careful not to scratch the glass when
cleaning. See
Cleaning Your Fireplace
section of
this manual.
Inspect the operation of the
fl
ame safety sys-
tem Pilot or Flame recti
fi
cation device.
Inspect and make sure the lighting of the main
burner occurs within 4 seconds of the main
gas valve opening. Visual inspection should
match that outlined in the appliance instruc-
tion manual. Inspect primary air openings for
blockage. See
Checking Pilot and Burner Flame
section of this manual.
Inspect condition of vent and vent terminal for
sooting or obstruction and correct if present.
Vacuum and clean any excess debris in the
fi
rebox that is not supposed to be there.
Test and measure the
fl
ame failure response
time of the
fl
ame safety system. It must de-
energize the safety shuto
ff
in no more than
30 seconds.
Check all accessible gas-carrying tubes, con-
nections, pipes and other components for
leaks. See
Set up Gas Supply
section of the
fi
replace Installation Manual.
Annual service and maintenance
Summary of Contents for H3 1000JN
Page 22: ...22 Notes...
