Owner’s Information
5. Replace the cover and screw in place.
6. Reconnect the battery box.
7. Put the battery box back in its position.
8. Reinstall the left access door.
Remote Control Handset Wall
Holder
Your
fi
replace equipment includes a wall
holder to store the handset. If it hasn’t be
installed, refer to the instructions further
on in this manual for the installation.
Servicing
If any attention is required for your appliance, contact
your supplier quoting the model number. It will be help-
ful if the appliance’s serial number can also be quoted.
This number is on the rating plate, which is located at
the right of the
fi
rebox. The replacement parts are shown
at the end of this manual. Please always quote the part
number and description when requesting spare parts.
Lighting, Operation and Rating Information
The Lighting, Operation and Rating information is
located on a plate at the right of the
fi
rebox. To access
the plate, remove the right hand side door, grab the
plate and take it out to read it. There is important
information on both sides of the plate.
Fireplace Control Devices
There are three ways to control your
fi
replace.
1. Thermostatic Remote Control;
2. Wall Switch (optional);
3. Manual On/Off Switch.
The manual On/Off switch must be ON for the
fi
replace to function. It can be used to shut off
the
fi
replace in case of emergency—see next
sub-section.
The Thermostatic Remote Control
can be programmed to function
automatically—see pages 9–14.
The Wall Switch (optional) can be
used to turn on, off and to increase
or decrease the
fl
ame height—see
1265WSK—Wall Switch Kit.
NOTE:
The remote control in the AUTO mode will
override the wall switch.
WARNING
DO NOT ATTEMPT TO TOUCH THE DATA PLATE
WHILE THE FIREPLACE IS STILL HOT!
Let the
fi
replace cool
fi
rst before touching it.
How to Turn Your Fireplace OFF
(including pilot)
Familiarize yourself with each of these methods before
operating your
fi
replace.
Handset and Wall Switch:
Press and hold the OFF
button for a second.
If the
fl
ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
Manual ON/OFF Switch:
Press the
O
button.
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your
fi
replace will not turn on when you
don’t want it on.
First, ensure your fi replace is turned off—including
the pilot—and cold BEFORE going ahead.
• Press
the
O
button on the manual ON/OFF switch
on the gas valve—see image above.
• Alternately, remove all batteries from the receiver as
well as the battery from the handset.
Automatic Shut-Off
(in certain conditions)
Your
fi
replace’s remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See page 14 in the
Remote Control
Operation
section for a description of this feature.
Manual ON/OFF Switch
Wall Switch
(optional)
Remote control
handset
Wall Switch
(optional)
Thermostatic
Remote
Control
OFF
ON
Manual On/
Off Switch
WARNING
!
8
OWNER’S
INFORMATION
