16
15. SAFETY GUARD FITTING
15.1
“Adorn” front; Locate the guard bottom wires over
the brass ashlip. Hold the top springs down. Swing
the guard back. Release the springs so that they
locate behind the canopy (See figure 30).
15.2
“Visage” front;
Locate the two wires projecting from each side of
the guard into the holes in the inner faces of the
visage front (see figure 31)
Figure 31 Fitting “Visage” safety guard
Figure 30 Fitting “Adorn” safety guard
f i r e - p a r t s . c o m
