9
10
INSTALL THE CERAMIC FUEL EFFECT PIECES
10.
Appliance code no. 4950 is supplied with coal fuel effect pieces - see section 10.1
Appliance code no. 4951 is supplied with log fuel effect pieces - see section 10.2
10.1
Coal effect installation:
10.1.1
Locate the coal bed (embossed "A" on its underside) in the firebox.
The back face should be against the rear of the firebox. The rear underside of
the coal bed should rest on the ledge at the back of the firebox. The vertical face
of the recess at the bottom front of the coal bed should be behind the black
front cross rail of the firebox. The extreme front of the coal bed should sit on
the top edge of the cross rail - see figure 9.
10.1.2
Position the front centre coal (embossed "B" on its underside) in
the well in the coal bed marked "B" - see figure 10.
The narrow "nose" should locate in the "U" shaped valley at the front of
the coal bed. The "nose" should be behind the vertical ledge at the front
of this valley and should not rest on top of it. The bottom of the coal
should rest on the ridges at each side of the location well marked "B" in
the coal bed.
Fig. 10 Coal “B” Location
Fig. 9 Coal Bed “A” Location
