12
10.2
Log Effect Installation
10.2.1
Place the rear log (the log with only one short stub) in the retaining cradle
behind the rear burner tube with its back against the firebox back wall (Fig.14). The
short stub should be at the top right of the log. Centre the log so that the gap to the
firebox walls is the same at each side.
10.2.2
Place the front log on the retaining cradles between the rear and front
burner tubes (Fig.15). Centre the log so that the gap to the firebox walls is the
same at each side.
10.2.3
Place the cross log in position (see Fig.16). The front of this log is
indicated by the letter "F" embossed on its underside. Make sure that the front
of the log is seated inside the hollow in the front log and is not raised in front of it.
Fig. 16 Cross Log Location
Fig. 15 Front Log Location
Fig. 14 Rear Log Location
