19
10.5
Install the 7 loose coals as follows. The smooth surfaces of the
coals should be at the bottom and back.
10.5.1
Select the two largest coals Place them in the central two valleys
of the front coal (See figure 28).
10.5.2
Place two of the remaining coals in the two outer valleys of
the front coal (One each side of the large coals) (See figure 29). Place
the left side coal so that the customer will be able to see the pilot
flame below the coal.
Fig. 29 Front row outer coals
Fig. 28 Front row inner coals
