background image

2

The information contained in this manual is believed 

to be correct at the time of printing. Miles Industries 

Ltd. reserves the right to change or modify any 

information or speci

fi

cations without notice. Miles 

Industries Ltd. grants no warranty, implied or stated, 

for the installation or maintenance of your heater, 

and assumes no responsibility for any consequential 

damage(s).

© Copyright Miles Industries Ltd., 2022. All rights reserved.

Designed and manufactured for Miles Industries Ltd

.

Valor Fireplaces

190–2255 Dollarton Highway 

North Vancouver, BC, Canada  V7H 3B1

T

604.984.3496  F

604.984.0246

valor

fi

 replaces.com

This appliance may be installed in an 

after-market permanently located, 

manufactured (mobile) home where 

not prohibited by local codes. This 

appliance is only for use with the type 

of gas indicated on the rating plate. 

This appliance is not convertible for 

use with other gases, unless a certi

fi

ed 

kit is used.

INSTALLER: Leave this manual with the 

appliance.
CONSUMER: Retain this manual for 

future reference.

 Massachusetts: 

The piping and 

fi

nal gas connection must be 

performed by a licensed plumber or gas 

fi

tter 

in the State of Massachusetts. Also, see Carbon 

Monoxide Detector requirements in the 

fi

replace 

installation manual.

 WARNING

This product can expose you to chemicals including Benzene, 

which is known to the State of California to cause cancer and 

birth defects or other reproductive harm. 
For more information go to www.P65Warnings.ca.gov.

Note: Natural gas, in its original state, contains Benzene. 

Summary of Contents for 1400MN































Reviews: