34
Installation Planning
Installer—READ THIS FIRST
1. Unpack the appliance.
2. Check that you have everything.
3. Finish
framing.
4. Fit appliance into framing.
5. Remove overlay, barrier screen bottom brackets
and
fi
x the appliance to the
fl
oor.
6. Reinstall overlay and screen bottom brackets.
7. Install venting system.
8. Install
restrictor.
9. Connect and test gas supply.
10. Install bricks and logs.
11. Re
fi
t window.
12. Connect electrical wiring for decorative light.
13. Install optional wall switch if required.
14. Put batteries in receiver and remote control
handset.
15. Perform initial remote control set-up.
16. Verify operation and adjust aeration settings.
17. Install the remote control handset wall holder.
18. Instruct the homeowner on the operation and
maintenance of the
fi
replace.
19. Install the window skirt.
20. Install the control access doors.
21. Install the andirons and fret if required.
22. Finish the wall around the
fi
replace.
23. Install the surround/doors/mantel if required.
24. Install the barrier screen.
10”
10”
3” Inlet & Exhaust
Collars
7-5/8” dia.
collar
559FSK Flashing Kit
559CLT Co-Linear Terminal
Alternate to 559CLT/559FSK Conversion
Terminal Cap
Co-Linear to Co-Axial
Adapter
Co-Linear Venting
Flashing
Co-linear terminal con
fi
gurations
Only quali
fi
ed licensed or trained personnel
should install this appliance.
BEFORE YOU START, YOU NEED TO KNOW
FROM THE HOMEOWNER:
•
The height of the
fl
oor or hearth
fi
nish;
•
The thickness and type of the wall
fi
nish
around the
fi
rebox opening;
•
What accessories (surround, door, etc.) will be
installed with this
fi
replace if any;
•
The venting con
fi
guration.
QUALIFIED
INSTALLER
