27
Framing
24”
50”
43-1/2”
1/2” thick cement board required
above and on each side of engine
(supplied w/engine) - Combustible
wall finish may butt up to
but not
cover cement board
FRAMING DIMENSIONS
Between underside
of header and base of
heater. Note: May
increase if raising heater
further. See Hearth
Requirements Section.
Any surface directly in front of
the unit which is at a height of
less than 4” from the bottom of
the unit
must be non-combustible
.
See chart for minimum
non-combustible projection
required to protect combustible
flooring in front.
When the appliance is
installed directly on
carpeting, tile or other
combustible material
other than wood
flooring, the appliance
shall be installed on a
metal or wood panel
extending the
full width and depth
of the appliance
QUALIFIED
INSTALLER
