1. HANDLING AND UNPACKING
Before continuing any further with the installation of this heater please read the
following:
Important instructions.
A carry handle is fitted to the top of the heater. We recommend that this is used
when moving the heater.
The approximate lifting weights (kg) of the heater parts are listed below: -
Model
Heat engine
Fascia
Spacer
Classica
8.21
9.73
1.0*
Innova
8.21
7.88
1.0*
Regalia
8.21
5.40
N/A**
* Although the heater is supplied with a spacer frame, an
optional spacer frame kit is
obtainable either from your heater supplier or direct from Valor Fires Sales. The kit is
a 71mm spacer kit (Kit number
0584081
). This spacer when added to the one
supplied with the heater enables the heater to be flat wall fixed.
** The Regalia model is not intended for wall mounting or installations requiring the
use of a spacer frame.
One person should be sufficient to lift the heater. If for any reason this weight is
considered too heavy then obtain assistance.
When lifting always keep your back straight. Bend your legs and not your back.
Avoid twisting at the waist. It is better to reposition your feet.
Avoid upper body / top heavy bending. Always bend from the knees rather than
the waist. Do not lean forward or sideways whilst handling the heater.
Always grip with the palm of the hand. Do not use the tips of fingers for support.
Always keep the heater as close to the body as possible. This will minimise the
cantilever action.
Use gloves to provide additional grip.
Always use assistance if required.
2. SAFETY
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Page 4
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2009.
