Lighting with a taper.
(See figure 5).
In the unlikely event of failure of the ignition spark,
the pilot can be lit by a taper or long spill.
Hold the taper or spill over the pilot.
Depress the control knob, turn it to PILOT/IGN
position and depress. The pilot flame should light.
Continue to depress the control knob for 10 seconds.
Release the control knob and the pilot should remain
lit.
To turn off.
To turn the main burner off but leave the pilot
alight, partially depress the knob and turn to
PILOT/IGN.
To turn the fire fully off, partially depress the knob
and turn to OFF.
Wait at least three minutes before relighting.
CLEANING YOUR FIRE
To maintain the high performance and quality finish of your fire please follow these
guidelines:
Before attempting to clean the fire, please remember to turn off the fire and wait for
the appliance to cool completely. The fire will retain heat for some time before
cleaning can begin.
If any pieces of debris are found in the hotbox, have the chimney inspected before
further use.
Metal and painted parts.
Clean the metal parts with a slightly damp, lint free non-abrasive cloth and then dry.
Do
not
use abrasive cleaners, as these will scratch the fire surface.
Burner top surface.
Do NOT touch or clean the top surface of the burner.
It is fragile. Do not brush or
vacuum it as this may damage the surface. With use the burner surface will change
colour. This is normal.
The top surface of the burner is made from ceramic fibre.
The ceramic fibre surface
contains Refractory Ceramic Fibres (RCF), which are man-made vitreous
silicate fibres. Excessive exposure to this material may cause irritation to eyes,
skin and respiratory tract. Consequently, it is important not to touch the burner
surface. If touched accidentally we recommend that hands are washed
thoroughly.
Page 42
©
Baxi Heating U.K. Limited 2010.
OWNER GUIDE
Figure 5. Lighting with a taper
Summary of Contents for 756
Page 48: ...Baxi Heating U K Limited 2010...
