GAS CONSUMPTION
Natural Gas
Has a maximum natural gas input of 5.3kW (Gross)
Has a maximum natural gas output of 2.45kW
Has a minimum natural gas input of 3.2kW (Gross)
Has a minimum natural gas output of 1.5kW
LPG
Has a maximum LPG input of 5.3kW (Gross)
Has a maximum LPG gas output of 2.45kW
Has a minimum LPG gas input of 4.3kW (Gross)
Has a minimum LPG gas output of 2.0kW
OPERATING YOUR FIRE
The Oxysafe flame sensing and flue blockage safety system.
For your safety, this appliance is fitted with a flue blockage safety device which will
shut down the appliance in the event of abnormal flue conditions.
This device is
NOT a substitute for an independently mounted Carbon Monoxide detector.
The device will also automatically shut off the gas supply to the fire if the pilot flame
goes out due to lack of oxygen or for any other reason.
If this device starts to repeatedly shut off the gas, get expert advice.
This device incorporates a probe which senses that the heat from the pilot flame is
correct. If this probe is cool, the device will prevent any gas flow unless the control
knob is held in at the ignition position.
If, for any reason, the flames go out when the fire is hot or if the fire is turned off
when hot, always
wait at least three minutes before attempting to relight
.
Page 40
©
Baxi Heating U.K. Limited 2010.
OWNER GUIDE
PLEASE NOTE
When operating your fire for the first time, some vapours may be given off which
may cause a slight odour and could possibly set off any smoke alarms in the
immediate vicinity. These vapours are quite normal with new appliances. They are
totally harmless and will disappear after a few hours use.
Summary of Contents for 756
Page 48: ...Baxi Heating U K Limited 2010...
