12.
The long length of self adhesive foam seal
supplied with the fire will need to be fitted to the
outer rear edges of the side and top pieces of
the spacer frame. Ensure that there is no gap
between the foam seals where they meet at the
top flange (See figure 17).
13.
Locate the spacer frame to the rear of the
hotbox
(The foam seal must be to the rear of
the spacer frame and NOT against the
flanges of the hotbox)
. Secure the spacer
frame to the hotbox using the six edge clips
supplied. Position these as in figure 18.
14.
Remove any protective film from the spillage
plate.
Page 23
©
Baxi Heating U.K. Limited 2010.
Figure 18. Fitting the edge clips
Figure 17. Fitting the foam seal
INSTALLER GUIDE
Summary of Contents for 756
Page 48: ...Baxi Heating U K Limited 2010...
