MANURE CONTROL
TECHNICAN
’S MANUAL V0.
3
2020-02-19
21
8.2
Event Parameter
To program event, press on
EVENT PARAMETER.
You can create up to 5 event that could come from an input, output, level or an equipment
TYPE:
•
Input:
PLC Digital input.
See Section 5.
•
Output:
PLC Digital Output.
See Section 5.
•
Level:
Analog Input, mainly use for level.
•
Equipment:
Equipment is started.
ADDRESS/EQUIPMENT:
•
Type
INPUT
or
OUTPUT
:
Address of the digital input or output.
See section 5.
•
Type
Level
: Programmed Level Sensor.
•
Type
Equipment
: Programmed Equipment
DESCRIPTION:
Message that will appear.
HIGH/LOW:
Up Arrow: Rising Edge of the condition will generate an event.
Down Arrow: Falling Edge of the condition will generate an event.
Level %:
The level setpoint if the type is set to
Level
.
