32
The START CYCLE button
is always set to one of the menu programs
(except when first using the machine).
1. Press the button
to display the set
NEW program or the LAST program used.
2. Press START CYCLE
again to start the
program (NEW or LAST).
3. Active program screen.
To change the program set to the START CYCLE button
(tips: Press the
button to change the program set to the START CYCLE button. Automatic switch to the
program screen. Enter one of the menu icons and select the desired program. For further
information see the chapter Shortcut to program start)
All menu programs are started with the START CYCLE button
.
The end of the cycle is notified by a beep and a light signal (if any). A message
is displayed to take out the ice cream. Should the operator not take out the ice
cream after the notice, the machine will keep ice cream consistency
automatically until extraction, i.e. until the end of the maximum time limit.
7.2.1.1.2 START with the START CYCLE BUTTON from the MENU
1. Press the button
to display the set
NEW program or the LAST program used.
2. Select one of the icons representing the
various menus to enter the list of available
programs.
Summary of Contents for SWEETY 60 TTi
Page 2: ...2...
