31
5
Quantity of the water flow. Liter meter providing to display
the number of liters (water) which was dispense into the
basin.
6
ACTUAL VALUES of the quantity (water in litres).
Factory default is 20 Lt.
7
DOWN BUTTON decreased the actual value. If the button
is grey the decreasing is not allowed.
8
UP BUTTON increased the actual value. If the button is
grey the increasing is not allowed.
9
Press the H
2
O STOP button to stop the dispensing of the
water. Use it when you want have a pause or when you
want to reset water quantity. If the button is grey the
stopping of the water filling is not allowed.
10
Press the H
2
O START button to start the dispensing of
the water. If the button is grey the starting of the water
filling is not allowed.
The new parameter is valid and used during the running program and will be
valid and used when running the program in future!
When you reset water quantity the program does not consider pre-filled water!
7.2 PUSH-BUTTON PANEL
7.2.1.1
key START
7.2.1.1.1 START with the START CYCLE BUTTON on the PUSH-BUTTON PANEL
Summary of Contents for SWEETY 60 TTi
Page 2: ...2...
