106
Every day before using the appliance, the correct functioning of the safety
switch on the kettle cover and door must be checked. When the appliance is in
mixing - both parts (press the
button, press the
button) phase open - rise
the kettle cover and remove the net of the batch feeder. On the both touch
screens (kettle – left side, cylinder – right side) in tutor message must show
caption
Er Door...
and the both mixing must be interrupted.
If any mixer not stopped immediately stop the machine and call service!
13.2 CLEANING THE SURFACES OF THE APPLIANCE
Surfaces are external parts of the appliance that do not come into contact with
ice cream mixture – the top cover, side panels and other external parts.
Never clean them with abrasive sponge or cloth and aggressive detergents,
which can scratch or otherwise damage the surface.
Cleaning process:
turn off the SAFETY SWITCH and the MAIN SWITCH;
make sure that the cylinder (cooking) cover, production door, batch
feeder cover and the cover of ejection opening are well closed;
clean the surfaces and make sure that the detergent does not touch
those parts, which do come into contact with ice cream mixture.
13.3 USING THE WATER PIPE FOR CLEANING
In order to clean or rinse-off the appliance or its parts, one can help oneself with
the shower, which is mounted on the top side panel of the machine.
The shower must be connected to fresh (drinkable) water supply
(see the
chapter on connecting the appliance).
How to use the shower:
grab the shower handle and pull it out;
point it towards those parts of the appliance, which need to be cleaned or
rinsed-off and open the water valve (in counter clockwise direction);
close the water valve (in clockwise direction) and place the shower back
to its place
In the case of wear or pipe breakage of the shower, the pipe of the shower must
be replaced.
Only original pipes must be used! Only in this way we can assure a well
and normal working water shower!
FLEXIBLE HOSE
(code – 10 422 013)
