3
© Vallox Oy - All rights reserved
MANU
AL
Replacing the lamp
• Remove the protective glass of the lamp by moving it to the
left (figure 3).
• Remove the lamp by pulling it to the left (figure 4).
• Lamp type: G23 LED.
INSTALLATION
Use the mounting accessories included in the package to
fasten the fan in place.
1. Fasten mounting brackets to the rear edge and the
sides of the fan (figure 1).
2. Lift the fan in place and fasten the mounting brackets of
the rear edge to the wall (figure 2). The mounting screws
included in the accessory bag are suited to walls made
of wood, chipboard, cement, and stone. Use appropriate
mounting devices for other materials.
3. Fasten the mounting brackets of the sides to the
cabinets (figure 3).
4. Connect the extract air ducts (suction ducts) to the
outlets located on the sides of the house extraction fan.
If the outlets are not used, leave them plugged. Connect
the blow-out duct to the centremost outlet. Ensure that
the connections are airtight.
5. Plug the house extraction fan into the mains. Ensure
that the plug can be unplugged, where required.
Ensure that the fire resistance rating of the duct network
complies with regulations.
3
4
1
2
4
min. 500 mm /
650mm
3
Cleaning the fan blade of the fan
• The fan of the house extraction fan is located in the fan
enclosure mounted on the smell absorption part behind
the spice cabinet or a similar structure.
• Remove the spice cabinet or the similar structure.
• Unplug the power cord from the socket.
• Unscrew the mounting screws of the fan enclosure.
• Remove the motor and the fan blade from the fan.
• Clean the fan blade with a brush and a wet cloth.
• Wipe the inside of the fan enclosure with a wet cloth.
CAUTION
A G23 PL lamp will cause damage!
CAUTION
The minimum distance of the bottom edge of
the grease filter to an electric cooker is 500
mm, and to a gas cooker 650 mm (figure 4).
CAUTION
• The fan must not be connected to a flue
that is used for removing combustion
gases (e.g. from a wood- or gas-burning
fireplace, cooker, or stove).
• Regulations on leading extraction air
outdoors must be observed.
Dimensions and
connection outlets
1. Extract air from rooms
to the fan
2. Exhaust air out
14
472
500
311
41
2
174
92
98
140
184
148
498/598
72
92
Ø124
Ø124
Ø124
1
1
2
