Vallox Pureo TX 1300 Manual Download | Manualshive

Page: 29 / 60

background image

29

© Vallox Oy - All rights reserved

MAINTENANCE

FILTER CHANGE

The unit must be fully isolated from the mains power supply before all

maintenance and cleaning measures.
The filters must be checked for contamination, damage, and odours

once in every three months. If the filters are damp or mouldy, they must

be replaced immediately.
The Vallox Pureo TX unit is equipped with an ePM1 60% class filter on

the outdoor air side and an ePM10 60% class filter on the extract air side

as standard. If another filter is to be used in the unit, the settings of the

controller of the unit must be modified.

DANGER

Danger to life due to electric shock!

The technical data of the standard filter can be found in the table

below:

1. Open the lock and turn the handles counterclockwise to open the

doors.

2. Pull the lock to release the filter.

3. Remove the filter.

IMPORTANT

The air flow direction

of the filter must be

observed!

NOTE

Replacement air filters

are also available online

at filters.vallox.com

1

3

2

«
...
27
28
29
30
31
...
»

Summary of Contents for Pureo TX 1300





























































Reviews:

No comments

Related manuals for Pureo TX 1300

Brand: Zline Pages: 20

Brand: Novy Pages: 28

Brand: Windster Pages: 16

Massimo INSERT FIMAS34B6SS-3

Brand: FALMEC Pages: 32

Brand: Malloca Pages: 24

MESA DME-M90ASSX

Brand: Zephyr Pages: 56

Siena ZSI-E30AS

Brand: Zephyr Pages: 7

LI_991.0431.691

Brand: Faber Pages: 136

Brand: Gaggenau Pages: 24

Brand: KOBE Pages: 31

Brand: Pelgrim Pages: 36

Brand: Pkm Pages: 52

Brand: V-ZUG Pages: 32

Apply 11104036A

Brand: Tecnosystemi Pages: 36

Brand: Electrolux Pages: 20

Brand: Electrolux Pages: 24

Brand: Electrolux Pages: 40

Brand: Electrolux Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands