Vallox Pureo TX 1300 Manual Download | Manualshive

Page: 32 / 60

background image

32

MAINTENANCE

CLEANING THE CONDENSATE TRAY

The unit must be fully isolated from the mains power supply before

all maintenance and cleaning measures. Risk of injury due to electric

shock, moving parts (fan), and hot surfaces. If a condensate pump

is installed, disconnect the condensate pump connections before

removing the service door. The condensate tray must be checked for

contamination and damage once in every 6 months.

DANGER

Danger to life due to electric shock!

1. Unscrew and remove the service panels.

2. Clean the condensate tray with a cloth.

CLEANING THE HOUSING

The unit must be fully isolated from the mains power supply before

all maintenance and cleaning measures. Risk of injury due to electric

shock, moving parts (fan), and hot surfaces.

• The housing must be checked for dirt, damage, and corrosion once

in every 12 months.

• Clean the housing with a damp cloth.

DANGER

Danger to life due to electric shock!

2

1

«
...
30
31
32
33
34
...
»

Summary of Contents for Pureo TX 1300





























































Reviews:

No comments

Related manuals for Pureo TX 1300

Brand: VESTEL Pages: 120

Brand: BOMANN Pages: 28

Brand: M-system Pages: 46

Brand: Faber Pages: 120

Brand: KOBE Pages: 66

Brand: Baumatic Pages: 21

Brand: Chef Pages: 13

Brand: FAR Pages: 21

Brand: IKEA Pages: 28

INCA LUX INLX21SSV2

Brand: Faber Pages: 80

Brand: FALMEC Pages: 2

Brand: Asco Pages: 26

Brand: Awoco Pages: 17

Brand: Creda Pages: 16

Brand: Xo Pages: 76

Brand: Xo Pages: 80

Spiral Anti-Sweep Hook

Brand: siffron Pages: 2

Brand: ROSIERES Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands