13
g
Congratulations on your excellent choice. Your new tool has
been manufactured according to the highest quality standards,
guaranteeing you long term service and safety.
This manual contains information deemed necessary for proper
use, knowledge and standard machine maintenance. It does
not show the information on the processing techniques for the
tiles nor does it consider their types and processing characte-
ristics; the user will find further information in specific books
and publications or by attending specialization classes.
Warnings on use and maintenance regulations refer to normal
operating needs. Normal machine operations, working life and
economy depend on their observance.
These instructions are an integral part of the machine and
must accompany it in the case of repair or resale. Carefully
keep the documentation supplied with the machine close at
hand for consultation in case of need.
For any repairs or revisions that require complex operations,
please contact authorised service centres which have spe-
cialised personnel.
The manufacturer is not liable for damages due to negligence,
failure to observe the instructions in this manual and direct
and/or indirect damages caused by improper use of the
machine.
Failure to observe the indications, poor and inadequate ma-
chine use and unauthorised tampering may void the warranty.
Accident prevention therefore depends on the strict observance
of what is established in this manual.
Upon purchase, make sure the machine is integral and
complete.
WARNING! Before using the machine, in order to ensure
that handling, initial start-up, starting, use, stopping, and
maintenance are carried out properly, read the instructions
below that refer to the drawings and technical data and apply
them carefully. Before starting work you should be familiar
with the controls and the correct use of this machine. Make
sure you know how to stop it in case of emergency. Incorrect
use of this machine may result in serious injury and damage
to property. Always consider your safety and the safety of
others and act accordingly.
WARNING! The machine is exclusively intended for DIY
use and it is suitable for making perpendicular and slanted
cuts on single-fired tiles, double-fired tiles, stoneware tiles
and klinker tiles.
Cutting metal, wood, plastic, flammable materials and materials
that generate harmful or toxic dust and vapours is prohibited.
Any use other than that indicated in these instructions may
damage the machine and constitute a serious risk to both
people and property.
MACHINE DESCRIPTION (FIG. A, H, M)
1 On/off switch.
2 Cutting blade
3 Blade guard
4 Rear splash guard
5 Blade rotation direction arrow
6 Piece support surface
7 Piece guide and graduated scale
8 Goniometer for slanted cuts
9 Handle for cutting movement
10 Motor and cooling fan
11 Support beam for the cutting head and graduated scale
12 Movement indicator
13 End stroke retainers
14 Screw for blocking cutting head
15 Handwheels for cutting head inclination
16 Legs
17 Frame
18 Water tank and base for machine
19 Brackets and screws for fixing tank
20 Water delivery pump
21 Pump fixing support (where fitted)
22 Pump flow rate regulator (where fitted)
23 Filter
24 Pump power supply cable
25 Delivery pipe
26 Portable differential current device with power supply plug
27 Test and reset button
29 Machine power supply cable
30 Bade locking nut
31 Blade locking flange
DESCRIPTION OF MARKS AND SYMBOLS (FIG. B)
1 Machine model and technical specifications.
2 Machine code, serial number or lot number, year of
manufacture, certification symbols (where applicable).
3 WARNING!
4 Read the instructions carefully before use.
5 Warning! Risk of cutting hands. It is compulsory to wear
protection gloves.
6 Warning! Risk of material ejection and dangerous dust
emission. It is compulsory to wear eye protection and a
mask to protect your respiratory tracts.
7 Warning! Risk of loud noise. It is compulsory to use ear
protection.
8 Warning! Risk of electric shocks. Some parts of the
machine are electrically-powered. Do not touch them and
keep a safe distance. Except for the pump, all the other
electrical parts must not come into contact with water.
9 Warning! Risk of moving blade. Keep your hands away
from the blade.
10 Warning! Before any control, adjustment or maintenance,
always disconnect the machine from the power supply
by unplugging it. Should the power supply cable be
damaged, remove the plug from the power supply socket
before inspecting it. If the water comes into contact with
electrical devices, remove the electricity supply by using
the mains switch in the building.
11 Only use continual crown or turbo blades. Do not use
segmented crown cutting blades.
12 Use water during cutting. Do not make dry cuts.
13 Electric and electronic waste may contain potentially
hazardous substances for the environment and human
health. It should therefore not be disposed of with do-
mestic waste, but by means of differentiated collection
at specific centres or returned to the vendor in the event
of purchasing a new identical tool. The illegal disposal
of such equipment may result in prosecution to the full
extent of the law.
