background image

-  11  -

TROUBLESHOOTING

If the machine vibrates: 

- disconnect the machine from the power supply

- disassemble the spool

- carefully clean the spool housing removing any 

possible residual of grass or other residue. If 

after reassembling everything the vibration 

persists, replace the spool with a new one.

If the machine fails to start: 

- check the electrical connections
- check the extension cable or change the power 

supply socket
- check the mains switch in your home

If the cut is unsatisfactory or the machine 

performances decrease: 

- adjust the length of the cutting element.

WARNING! If the machine still fails to function 

correctly after you have carried out the above 

operations, or in the event of anomalies other 

than those described above, take the machine 

to an authorised service centre. Provide the 

machine model and serial number shown 

on the technical data label and the enclosed 

sheet. 

STORAGE

- After use, clean the entire machine and its 

accessories carefully (see maintenance 

paragraph), thus preventing any mould from 

forming.

- Keep the machine out of reach of children, in a 

stable safe position, in a dry place not subject 

to extreme temperatures and free from dust.

- Protect the machine from direct sunlight, 

keeping it in the dark where possible, or in 

the shade.

- Do not close the machine in plastic bags as 

damp could form.

- Once the mowing season is over, the machine 

should be cleaned thoroughly and you should 

ensure that all its components are in good 

working order.

- Do not leave the machine resting on the ground, 

but hang it so that the protection does not touch 

anything. If the protection rests on a surface, it 

could get deformed and modify its dimensional 

and safety characteristics.

  

DEMOLITION

Electric and electronic waste may contain 

potentially hazardous substances for the envi-

ronment and human health. It should therefore 

not be disposed of with domestic waste, but 

by means of differentiated collection at specific 

centres or returned to the vendor in the event of 

purchasing new equipment of the same type. 

The illegal disposal of such equipment may 

result in prosecution to the full extent of the law.

WARRANTY

The product is protected by law against non-

compliance with the declared characteristics 

provided it is used only in the manner described 

in the instructions, it has not been tampered with 

in any way, it has been stored properly, has been 

repaired by authorized and, where applicable, 

have been used only original spare parts.

In the case of industrial or professional use or 

when using such a guarantee is valid for 12 

months.

To issue a claim under warranty you must 

present proof of purchase to your dealer or 

authorized service center.

Summary of Contents for TB26 FG













Reviews: