- 18 -
the shaped shaft of the motor
8) Tighten the screw with washer well without
hitting the key with a hammer or other tool
9) Carefully check that the blade guard goes
back into rest position and that it works
correctly
10) Make sure the blade turns freely without
jerks
11) Carry out a test with the machine running
idle.
MOTOR BRUSHES
The motor of this machine is equipped with a
pair of graphite brushes. They must be checked
and replaced by an authorised service centre.
PROBLEMS, CAUSES AND SOLUTIONS
PROBLEM
CAUSES
SOLUTIONS
The electrical
tool fails to
start
Power supply
line discon-
nected
Check the electric
power supply line
Plug not
inserted
Insert the plug in the
electric power sup-
ply socket and press
the start button
Worn graphite
brushes
Contact an authori-
sed service centre
Electrical fault Contact an authori-
sed service centre
The electrical
tool starts
but does not
cut well. The
electrical tool
vibrates a lot.
Worn, dull
or damaged
blade
Replace the blade
Incorrectly
assembled
blade
Disassemble the
blade and reassem-
ble it correctly
The mobile blade
guard does
not move or is
difficult to move
Cutting resi-
duals hinder
its movement
Clean thoroughly
!
!
IMPORTANT! If the electrical tool still fails
to operate correctly after you have carried
out the above operations, or in the event of
anomalies other than those described above,
take it to an authorised service centre with
proof of purchase and ask for original spare
parts. Always provide the information shown
on the technical data label.
STORAGE
Clean the tool and all its accessories thoroughly
(see Maintenance section). Protect the unpainted
parts with protective oil and use the original
packaging or case (where fitted) to protect it.
Keep the machine out of reach of children, in a
stable and safe position. The place must be dry,
free from dust, temperate and protected from
direct sunlight.
Keep children and unauthorised personnel out
of the storage room.
DISPOSAL
In order to protect the environment, proceed
according to the local laws in force. Contact the
relevant authorities for more information.
When the machine is not longer useable or re-
pairable, deliver the machine and packaging to
a recycling centre. Take out the batteries (where
fitted) and dispose of them separately.
Electric and electronic waste may contain
substances that are dangerous for the envi-
ronment and for human health. For this reason
they must never be disposed of together with do-
mestic waste, but collected separately in specific
collection centres or returned to the retailer when
similar new equipment has been purchased. The
illegal disposal of such equipment may result in
prosecution to the full extent of the law.
WARRANTY
The product is protected by law against all non-
conformities with regard to its stated characte-
ristics, provided that it has been used solely in
the way described in this user’s instructions, it
has not been tampered with in any way, it has
been stored correctly, it has been repaired by
authorised personnel and, where necessary, only
original spare parts have been used.
In the event of industrial or professional use
or similar, the warranty is valid for 12 months.
To issue a request for intervention covered by
warranty, proof of purchase must be shown to
the retailer or authorised service centre.
