- 12 -
g
GENERAL SAFETY WARNINGS
IMPORTANT! Read all the warnings and instructions.
Failure to comply with the warnings and instructions may
cause electric shock, fire and/or serious injuries.
Strict observance of these warnings with the use of personal
protective equipment minimizes risks of accidents but does
not completely rule them out.
Use the appliance as described in these instructions. Do not
use it for purposes for which it was not intended.
These instructions refer to an appliance that is manufactured
in several models and versions. Carefully read and observe
the safety standards and operational instructions provided
hereafter.
Store all warnings and instructions for future reference.
The term “power tool” in the warnings refers to the machine
tools operated by means of (wired) connection to the electric
power supply or battery (wireless).
1) Safety in the work area
a) Keep the work area clean and well lit.
Overcrowded and/or
badly lit areas may cause accidents.
b) Do not operate power tools in explosive atmospheres, e.g.
in the presence of flammable liquids, gases or powders.
Power tools create sparks that may ignite powders or fumes.
c) Keep children and unauthorised personnel at a distance
when operating a power tool.
Distractions may cause you
to lose control of the tool.
d) Keep the nylon packaging bags in a safe place.
Bags can
cause suffocation and must be kept out of the reach of
children.
e) Use the tool in a well-ventilated area.
Ventilation is neces-
sary for cooling the tool and for eliminating air impurities
produced when working.
f) Do not operate power tools outdoors in the presence of
rain, fog, storms, high or low temperatures, or in damp
or wet environments.
Use in these conditions may cause
electrocution.
2) Electrical safety
a) The power tool plug must correspond to the socket. Never
modify the plug in any way. Do not use adaptors with
earthed power tools.
Unmodified plugs and suitable sockets
reduce the risk of electric shocks.
b) Do not allow the body of the appliance to come into contact
with earthed surfaces such as pipes, radiators, cookers
and refrigerators.
If your body is earthed, the risk of electric
shock increases.
c) Do not expose power tools to rain and do not use them
in wet environments.
Water permeating into a power tool
increases the risk of electric shocks.
d) Do not let the cable become worn. Never use the cable to
transport, pull or disconnect the power tool from the power
supply socket. Keep the cable away from heat, oil, sharp
edges or moving parts.
Damaged or twisted cables increase
the risk of electric shocks.
e) When using a power tool outdoors, use an extension cable
suitable for outdoor use.
The use of a suitable cable reduces
the risk of electric shock.
f) Use an electric power supply protected by a differential
switch (RCD).
The use of a suitable residual current device
(RCD) reduces the risk of electric shock. Consult your elec-
trician.
g) The power supply must correspond to that indicated on
the power tool.
An unsuitable power supply generates
malfunctioning and accidents.
h) Frequently check the power supply cable. Do not crush or
tread on the power supply cable.
A damaged cable causes
electric shock.
i) In case of doubt regarding electricity, consult an expe-
rienced technician.
The unsafe use of electricity is very
dangerous for yours and other people’s safety.
3) Personal safety
a) Never allow yourself to be distracted. Control what you
are doing and use your common sense when using power
tools. Never use the tool when you are tired or under the
influence of drugs, alcohol or medicines.
A moment of
distraction when using power tools could cause serious
personal injuries.
b) Use personal protective equipment. Always wear eye
protection.
Protection equipment such as dust repelling
masks, anti-slip safety shoes, gloves, safety helmets, or ear
protections reduces the possibility of personal injuries.
c) Prevent switching the appliance on accidentally. Make sure
that the switch is in the off position before connecting the
tool to the electric power supply and/or to battery units and
before taking or transporting it.
Carrying power tools with
your finger on the switch or connecting them to the electric
power supply with the switch in the on position can cause
accidents.
d) Remove any adjustment wrench before switching on the
power tool.
Any key or spanner left attached to a rotating
part of the power tool may cause personal injuries.
e) Do not lose your balance. Always keep an appropriate
position and balance.
This allows better control of the power
tool in unexpected situations.
f) Wear appropriate clothing. Do not wear loose clothing or
jewellery. Keep hair, clothing and gloves away from moving
parts.
Loose clothing, jewellery or long hair may get entangled
in the moving parts.
g) If any devices to be connected to dust extraction and
collection systems are provided, make sure that they are
connected and used appropriately.
The use of these devices
may reduce the risks connected with dust.
h) The user is responsible for other people as far as accidents
or damage to people or property are concerned.
Improper
use causes accidents and damage.
i) Never use with bare or wet feet/hands.
Use in these con-
ditions may cause electrocution.
l) Processing of harmful materials must be performed in
compliance with the laws in force.
Some types of dusts
and materials such as metals, wood, paints, etc. are very
harmful to health. Protect your and other people’s health
using suitable protections and devices.
m)Do not approach the cooling air ejection slots.
The air
generated may contain machining residuals and small parts
that are harmful for your respiratory tracts and eyes.
n) Do not cover or insert things in the cooling slots.
Unsuitable
ventilation of the power tool may start a fire. Accessing the
internal parts may damage the tool and cause electrocution.
o) Do not use the power tool if the guards (screens, panels,
doors, etc.) are open, damaged or missing.
Correctly
installed guards protect your health and allow safe use.
4) Use and maintenance of power tools
a) Do not force the power tool. Use a suitable tool for the
operation to be carried out.
An appropriate power tool can
perform the work with higher efficiency and safety without
having to exceed the parameters intended for its use.
