background image

-  11  -

SHARPENING AND CHANGING BLADE 

(FIG.L)

!

!

WARNING! Wear work gloves and discon-

nect the mower from the mains.

- Unscrew the blade’s fastening screw.

- The blade should be sharpened by setting it in 

a clamp and uniformly filing the cutting edge. 

Check it is balanced.

- If the blade is worn and needs changing only 

use genuine spare parts as specified in the 

attached sheet.

- Replace the blade following the direction of 

rotation and fix it carefully. 

Use only original spare parts.

TROUBLESHOOTING

If the machine does not start:

- check the electrical connections

- check the extension cord or change power 

socket

- check the main switch of the electrical system

-press the button and then pull the lever switch 

If the motor stops:

- check the electrical connections 

- check the extension cord or change power 

socket

- check the main switch of the electrical system

- increase cutting height

- wait for the automatic reset of overload pro-

tection

- make sure that the grass ejection port is not 

clogged.

If the grassbox does not fill up:

- adjust the cutting height

- make sure that the grass is not wet

If the cut is not satisfactory:

- adjust the cutting height

- if the blade is blunt, sharpen it

If the machine vibrates 

- check the blade mounting 

- offset or replace the blade

!

!

CAUTION! If after the above checks the 

machine does not work correctly or in case of 

malfunctions different from those listed, have 

it checked by an authorised service centre. 

Always refer to the machine model and serial 

number indicated on the rating plate.

STORAGE

- After each use, carry out a general cleaning of 

the entire machine and its ancillary parts (see 

maintenance paragraph); this prevents mould 

from forming.

- Keep the machine out of the reach of children, 

in a safe, dry, temperate and dustfree place.

- Store the machine away from direct sunlight, 

if possible in a dark or barely lit place.

- Do not store in a nylon bag as this could en-

courage the formation of damp patches.

- At the end of the cutting season the machine 

should receive an overall cleaning and thorough 

check-up of the condition of its components.

- The handgrip can be folded to take up less 

space.

DEMOLITION:

 Electric and electronic waste may contain 

substances that are dangerous for the envi-

ronment and for human health. For this reason 

they must never be disposed of together with do-

mestic waste, but collected separately in specific 

collection centres or returned to the retailer when 

similar new equipment has been purchased. The 

illegal disposal of such equipment may result in 

prosecution to the full extent of the law.

WARRANTY

The product is protected by law against non-

compliance with the declared characteristics 

provided it is used only in the manner described 

in the instructions, it has not been tampered with 

in any way, it has been stored properly, has been 

repaired by authorized and, where applicable, 

have been used only original spare parts.

In the case of industrial or professional use or 

when using such a guarantee is valid for 12 

months.

To issue a claim under warranty you must 

present proof of purchase to your dealer or 

authorized service center.

Summary of Contents for S496214













Reviews: