background image

11

 STORAGE

Follow the tips below to store the tool:

1) Ensure that the nozzle has cooled down com-

pletely (to room temperature).

2) Clean the machine and all its accessories 

thoroughly (see MAINTENANCE section).

3) Store it: out of reach of children; in a stable 

and safe position; in a warm and dry place; 

avoid excessively high or low temperatures.

4) Protect it from direct sunlight.

5) Do not seal it in nylon bags where humidity 

could form.

6) Put the machine away in its container after 

use.

DISPOSAL

In order to protect the environment, proceed accor-

ding to the local laws in force. Contact the relevant 

authorities for more information.

When the machine is not longer useable or re-

pairable, deliver the machine and packaging to 

a recycling centre. Take out the batteries (where 

fitted) and dispose of them separately.

 Electric and electronic waste may contain sub-

stances that are dangerous for the environment 

and for human health. For this reason they must 

never be disposed of together with domestic 

waste, but collected separately in specific col-

lection centres or returned to the retailer when 

similar new equipment has been purchased. The 

illegal disposal of such equipment may result in 

prosecution to the full extent of the law.

WARRANTY

The product is protected by law against non-

compliance with the declared characteristics 

provided it is used only in the manner described 

in the instructions, it has not been tampered with 

in any way, it has been stored properly, has been 

repaired by authorized and, where applicable, 

have been used only original spare parts.

In the case of industrial or professional use or 

when using such a guarantee is valid for 12 

months.

To issue a claim under warranty you must present 

proof of purchase to your dealer or authorized 

service center.

DECLARATION OF CONFORMITY

The firm indicated on the label declares, under 

its own responsibility, that the product cited 

there complies with the essential health and 

safety requirements contained in the following 

European directives:  2014/30/EC, 2014/35/EC, 

2011/65/EC.

Valex SpA

Via Lago Maggiore 24 - 36015 Schio (VI) - Italy -

Schio,  07 2016

Attorney 

ARRIGO ZANELLA 

Summary of Contents for PTE 2100













Reviews: