- 14 -
g
SYMBOLS
Carefully observe the symbols in fig. B and
memorise their respective meanings. Correct
interpretation of the symbols allows safer use
of the machine.
1 Machine model
2 Technical data
3 Batch number (the first 2 figures of the batch
number indicate the year of manufacture)
4 Certifications
V Volt
Hz Hertz
~
alternating current
Direct current
W Watt
mm millimetres
°C
degrees centigrade
g grams
min minutes
double electric insulation
___________________________________________
We thank you for purchasing this product, which
will hereafter also be referred to as “spray gun”.
!
!
WARNING! Before using this machine,
in order to ensure that handling, servicing,
starting, use, stopping, and maintenance are
carried out properly, read the instructions be-
low and apply them carefully. Before starting
work you should be familiar with the controls
and the correct use of this machine. Make sure
you know how to stop it in case of emergency.
Incorrect use of this machine may result
in serious injury. This machine may not be
used in places covered by the anti-explosion
standards.
Keep these instructions and the safety in-
structions carefully and close to hand for
consultation in case of need.
Always bear your own safety and that of others
in mind, and act accordingly.
!
!
WARNING! This painting machine is only to
be used for spraying non-inflammable coating
materials such as paints, transparent ena-
mels, etc. that have a flash point higher than
21°C. Do not use with any other type of paint.
!
!
WARNING! Any use other than that indica-
ted in these instructions may damage the ma-
chine and constitute a serious risk to the user.
COMPONENTS
Refer to fig. A and the following figures.
1 Spraying unit
2 Motor body with handle
3 Ventilation openings
4 Lock button
5 Trigger
6 Paint flow adjustment wheel
7 Battery compartment
8 Release button for the battery lock
9 Color suction tube
10 Paint container
11 Ring
12 Butterfly nozzle
13 Lever to adjust the dispensing angle
14 Set nozzles (2.2mm 1.8mm 1.5mm)
15 Viscosiment
16 Cleaning brush
17 Cleaning needle
18 Air filter
