- 8 -
g
!
!
IMPORTANT! This vacuum cleaner is ideal
for suctioning ash at room temperature, dust
that is not harmful to health such as rubble,
wood chips and the like.
These instructions contain information deemed
necessary for proper use, knowledge and standard
appliance maintenance. They do not include infor-
mation on the danger of some substances; the user
can find more information in specific books and
publications or by attending special training courses.
SYMBOLS (FIG.B)
1 Technical data
2 Double electric insulation
3 Certifications
V volt
Hz hertz
~ alternating current
W watt
l litres
COMPONENTS
Refer to fig. A and the following figures, attached
to these instructions.
1 On/off switch
2 Vacuum head
3 Vacuum hose connection
4 Air exhaust / Blowing connection
5 Handle for transport
6 Collection tank
7 Vacuum head release latch
8 Vacuum hose
9 Vacuum side sleeve
10 Accessory side sleeve / Hand grip
11 Vacuum nozzle
12 Power supply plug and cable
13 Vacuum filter
14 Fabric prefilter
INSTALLATION
!
!
IMPORTANT! The manufacturer is not
liable for any direct and/or indirect damage
caused by incorrect connections.
!
!
IMPORTANT! Before carrying out the
following operations, make sure that the plug
is disconnected from the mains.
TRANSPORT
Always use the packaging when transporting the
appliance; this will protect it from impact, dust
and humidity which can compromise normal
operation.
HANDLING
Hold the appliance by the hand grip and after
use put it down gently.
STARTING UP
When choosing where to use the electrical vacu-
um cleaner, the following should be considered:
- that the area is not damp and is sheltered from
the elements.
- that the working area is sufficiently large and
free from obstacles.
- that the area is well lit.
- that there is sufficient air exchange.
- that the appliance is used close to the main
differential switch.
- that the power supply system is earthed and
conforms with standards (only if the electrical
appliance is Class I, and equipped with a plug
with earth cable).
- that the room temperature should be between
10° and 35° C.
- that the environment is not in a flammable/
explosive atmosphere.
The machine may be supplied with some loose
components. Take the machine and the loose
components out of the packaging and proceed
to assemble them as shown in the enclosed
figures. Only for transportation purposes, some
components may be contained within the col-
lection tank.
FILTER ASSEMBLY (fig.C).
Assemble the vacuum filter (pos.13) on the va-
cuum head as indicated in the picture, ensuring
the sealing area adheres well.
