6
Get up quickly
Use the phrase loop function (LOOPER)
In the main interface, press the [Ctrl] foot pin to enter the LOOPER interface.
Recording
playing
Recording
Recording-Red
Play-Green
Overdub-Blue
Rotate the PARA knob in this interface to change the currently used preset. Press PARA to quickly adjust the
display area to scroll through. When dual options are provided in the foot pin function display, the left side
corresponds to the short step, and the right side Corresponding to step down.
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Recording volume: change the recording volume of the phrase looper;
Pre/Post: select the phrase looper at the very end of the effect chain,
"Post" needs to take up twice the recording time;
Playback volume: change the playback volume of the phrase looper;
Recording time: When the "Undo/Redo" function is not needed, 180 seconds of recording time can be selected. Camera synchronization*: The timeline of LOOPER can be aligned
with the speed of the camera. When this function is activated and the camera is played, the audio will be adjusted in a small amount of time to be aligned with the camera.
Automatic recording: Turn on the automatic recording mode, and when the automatic recording function is activated, stepping on the recording pin will not burn into the recording state, but when
the GP-200 detects a certain intensity The input signal will be recorded into the recording state immediately.
Ÿ
The function of the foot pegs in the LOOPER interface will be different from the default mode. The specific functions of the default state are as follows:
Stepping nail 1 Stepping nail 2 Stepping nail 3 Stepping nail 4 Stepping nail 5 Stepping nail 6
[-]
[+]
[CTRL] [TAP]
[A]
[B]
Tread nail 7
[C]
Tread nail 8
[D]
Tread nail number
Single step
Down
1/2 speed
Reverse
/
Tuning table redo
Stop
Empty
Features
Preset group
Record/play
quit
* Notice:
鼓
The error of machine synchronization needs to be controlled within 50ms, otherwise the alignment will fail and no actual effect will be produced.
Use
鼓
machine (DRUM)
Press the DRUM button to turn on the camera, and press the button to enter the interface of the camera.
Rotate PARA on the camera interface to switch between the camera frames, and press
PARA to switch between the frame list and the rhythm pattern list.
There are a total of 100 rhythm patterns in the GP-200
鼓
machine (please refer to the
鼓
machine
rhythm pattern list for details).
-
Rock
Funk
Blues
Pop
Jazz
Electronic
World
Metro
Classic Rock 1
Classic Rock 2
Classic Rock 3
Classic Rock 4
Classic Rock 5
Classic Rock 6
Hard Rock 1
Hard Rock 2
Ÿ
Rotate the No. 1 quick adjustment knob to change the speed of the machine, the range is
40-250;
Rotate the No. 2 quick-tuning knob to change the output volume of the machine, the range is
0-100;
Rotate the No. 3 quick adjustment knob to adjust the machine speed to the preset speed
Steps, after synchronization, you can use the dot and fixed speed to control the speed of the camera
system.
You can exit the camera interface by pressing the BACK button.
Ÿ
Ÿ
After the machine is turned on, the machine on the right side of the main interface
The symbol prompts the current status of the camera switch.
-
Ÿ
