8
Preset settings
Adjust the order of the effect chain
After selecting a module in the editing interface, press PARA to enter the effect chain sequence switch:
Mobile effect chain
Rotate the PARA knob to select the effect module that needs to be moved
Ÿ
Ÿ
Ÿ
Quick adjustment knob -1- switch the current effect module
Quick adjustment knob -2- move the currently selected effect module
The quick adjustment knob -3- provides a quiet mode (only effective in this boundary), which can
avoid the potential noise generated during the process of moving the effect module.
Effect switch
Quiet
At the bottom of this screen, press PARA or press the BACK button to return to the
editing screen.
move
Turn on
closure
Notice:
Ÿ
When you are assigning/editing effects in the module, in some extreme cases, a prompt will appear on the screen that the system resources are insufficient. If this prompt
appears, please change to another effect and try again.
All module switch states and effect parameters will change with your preset switching. If you switch the preset or
switch the machine before saving, all the edits made before will disappear. So please be sure to click the SAVE button
after setting to save your settings.
In the editing interface, the foot pin function remains consistent with the main interface.
Ÿ
Ÿ
Preset related settings
When the cursor selects a preset setting, use the quick adjustment knob to adjust the preset volume and preset speed. When you click to enter the
preset setting menu, the list provides settings for fast-tuning knobs, pedals, CTRL, and effect loop functions.
Quick adjustment knob 1-3
Pedal settings
CTRLset up
Effect loop
Module 1
PRE
Boost
Parameter 1
Gain
Ÿ
Ÿ
Quick-tuning knobs 1-3: Set the effect parameters currently preset to be controlled by the quick-tuning knobs in the main interface. Pedal settings: The current preset expression pedal settings,
including EXP-1A, EXP-1B, and EXP-2, each pedal can be associated with up to 3 effect parameters at the same time, and it also has the setting of pedal extreme values. Among them, EXP-2
represents an external pedal, which can be used normally after selecting related functions and calibrating through global settings.
Notice:
The parameters associated with the pedal are regarded as the use of the module parameters, and no markup for saving will be produced.
Ÿ
CTRL setting: You can specify the switch of one or more modules. There are four CTRLs for you to configure. With the "Global-Foot" option, your GP-200 can
implement multiple modules in the same preset. The switch is switched to achieve a single-block matrix-like operation experience. Effect loop: the setting of the effect
loop in the current preset. The sending and returning nodes are fixed behind the AMP module. Parallel/series indicates the coexistence relationship between the
effect circuit and the effect chain:
◦
When parallel connection is selected, the signal returned through the external effect chain will be mixed with the signal of the AMP module and then enter the signal of the effect chain behind
the AMP module for processing;
◦
When serial is selected, the internal effect chain is disconnected, and only the signal returned by the external effect chain is entered into the AMP module for processing. At this time, if the effect
circuit connection is not connected to a physical effect device, the output of this unit will be silent.
Ÿ
