23
BOB, The Brown-Out Booster
To save fuel, some newer cars automatically switch off the engine instead of
idling. As they restart, power to accessories momentarily drops below V1’s
10-volt minimum, causing it to repeat its start-up sequence when voltage is
resumed. BOB (optional) solves the problem by maintaining voltage during
these brief sags. BOB has two RJ11 (telephone) jacks. Run a power cord from
the source of 12V to the jack labeled “To 12V.” Plug power cord from V1 into
the jack labeled “To V1.”
BOB is an electronic device that doesn’t use a battery and requires no periodic
service. Dimensions: 1.0-in H x 1.7-in W x 1.2-in D; Weight: 0.5 ounces.
Install according to one of the following diagrams:
Remote Audio Adapter
Lighter Adapter
Valentine One
Lighter Adapter
Concealed Display
Main
Acc
Main
Acc
Power Out
Main Unit
To 12V
To V1
To 12V
To V1
To 12V
To V1
To 12V
To V1
#3
#4
Remote Audio Adapter
Power Out
Power In
Brown-Out
Booster (BOB)
Direct-wire
Power Adapter
Concealed Display
Power In
Main Unit
Acc
Valentine One
Power Out
Brown-Out
Booster (BOB)
#2
Valentine One
Brown-Out
Booster (BOB)
Valentine One
Brown-Out
Booster (BOB)
Direct-wire
Power Adapter
Remote Audio Adapter
Power Out
Power In
Concealed Display
Acc
Power In
Remote Audio Adapter
#1
• NOTE: Remote Audio Adapter does NOT control power to V1
.
• NOTE: Remote Audio Adapter does NOT control power to V1;
but it will turn the Concealed Display off and on.
• NOTE: Remote Audio Adapter controls power to V1.
• NOTE: Remote Audio Adapter controls power to V1.
Summary of Contents for V1
Page 2: ......
