Valentine One V1 Gen2, Owner'S Manual

Page: 10 / 40

6
How to connect a headphone
Plug headphone jack into the detector’s 3.5mm socket. For Bluetooth
headphones, connect through your phone.
How to set Muted Volume
In addition to the Initial Volume, you can also set the sound level you will
hear after muting: Tap or to start the test tone. Tap the Control
Button (Mute icon will appear), then press or until you’ve reached
your preferred sound level. Sound level 0-9 indicated in display.
Display readings
1. If the display is dark:
a) Power is off, or;
b) A Concealed Display is connected, or;
c) Dark Mode has been enabled in the app.
2. With power on, in the absence of alerts, the current Mode will be
displayed.
3. During alerts:
a) The Mode indication will be replaced by the Bogey Count (number of
radar signals in range).
b) Signal strength indicated by a vertical bar graph.