11
INSTALLATION: Using Lighter Adapter
1. Slide Lighter Adapter with Articulated Bracket into cavity on back of
Concealed Display.
2. Connect Acc on Lighter Adapter to Concealed Display with 3-inch cord.
3. Adjust angle on Lighter Adapter, then insert Lighter Adapter into
lighter socket.
4. Run the power cord from the Main jack on the Lighter Adapter to
Valentine One Gen2.
5. To operate, set volume and your choice of Analyzer Modes on Valentine
One Gen2 (see instructions on pages 4 and 6).
IMPORTANT NOTE:
Do not use Direct-wire Power Adapter with Lighter Adapter.
INSTALLATION: Using Mounting Plate
1. Slide Mounting Plate into cavity on back of Concealed Display.
2. If using Dual Lock
®
, adhere one square of Dual Lock to the recess on the
back of the Mounting Plate. Adhere mating Dual Lock square to desired
mounting location.
3. If using the Direct-wire Power Adapter, follow instructions on page 8.
4. Run a power cord from the Acc jack on the Lighter Adapter, or the
Accessory jack on the Direct-wire Power Adapter, to the Concealed
Display.
5. Run a power cord from Main jack on the Lighter Adapter, or the Main
Unit jack on the Direct-wire Power Adapter, to Valentine One Gen2.
6. To operate, set volume and your choice of Analyzer Modes on Valentine
One Gen2 (see instructions on pages 4 and 6).
IMPORTANT NOTE:
Do not use Lighter Adapter with Direct-wire Power Adapter.
Valentine One
Generation 2
Power Cord 3-in.
Concealed Display
Lighter Adapter
Power Cord
Acc
Main
Acc
Main
Concealed Display
Direct-Wire
Power Adapter
Power Cord
Power Cord
Ground
(Black)
+12VDC
(Red)
Valentine One
Generation 2
Lighter Adapter slides into place.
Mounting plate slides into place.
NEW CONCEALED DISPLAY
ILLUSTRATION
TO COME
NEW CONCEALED DISPLAY
ILLUSTRATION
TO COME
Summary of Contents for V1 Gen2
Page 1: ...OWNER S MANUAL With exclusive Analyzer Modes All Bogeys Logic Advanced Logic powered...
Page 2: ......
Page 39: ......