24V BACA
OPERATION MANUAL
AUS
1300 734 253 NZ 0800 734 253
8
–
Elapsed time:
is the time since the beginning of the actual process (charging or discharging).
–
Voltage:
the voltage of the battery (during discharging), or the actual charging voltage (during charging).
–
Cycle:
number of cycles.
–
Process:
charging or discharging
–
Ah:
the actual charged or discharged Ah since the beginning of the actual process (charging or discharging).
Pressing the DISPLAY CHANGE button, you can view the result of the finished cycles.
Pendrive Suspend
Before removing the USB stick from the tester, make sure the actual test is finished. Then enter the Pendrive Suspend menu
and press the START button. Remove the pendrive and plug it into the PB USB and open the files with Akku.exe.
The test file on the pendrive is finished when the test is finished or stopped by pressing the START/STOP button. Removing
the pendrive or disconnecting the battery from the tester during the test will cause the loss of test data of the entire test.
ERROR MESSAGES
–
No Pendrive 000:
this indicates that there is no USB connected to the tester. Please insert a USB before trying the
test again.
–
ERROR 001 ERROR 003:
the tester is unable to write on to the USB. Remove the USB from the tester, connect it
to a computer, remove the data from the USB and format it. During the formatting, any data left on the USB will
be permanently deleted. Once the USB has been formatted, copy the data back on to the USB, remove from the
computer, disconnect the tester from the battery and battery charger, wait for the screen to go blank and then
insert the USB. Connect the battery and charger and try starting the test again.
Measured Voltage Range
12V to 30V
Maximum Input Voltage
30V
Minimum Input Voltage
12V
Discharging Current
0.3A to 25A (0.1A steps)
Current Error
+2% +0.05A
Cut-off Voltage
12V to 30V
Charging Time
1 hour to 99 hours
Maximum Number of Cycles
200
Dimensions
200 x 140 x 105
Weight
2kg
TECHNICAL SPECIFICATIONS
